NGHIÊN CỨU CÔNG NGHỆ THẤM NITƠ NHIỆT ĐỘ THẤP CHO MỘT SỐ MÁC THÉP KẾT CẤU
Nội dung chính của bài viết
Tóm tắt
A RESEARCH ON THE LOW-TEMPERATURE NITRIDING FOR SOME STRUCTURAL STEEL GRADES
This article presents the QPQ low temperature nitrocarburizing and plasma nitriding technologies for three steel grades C50, 30XH3A and 25X2H4BA. Various tests were carried out to determine the influence of these technologies on the change of surface quality parameters, surface hardness, hardness distribution according to the nitrided layers. In addition, the image of the microstructure and thickness of the nitrided layers were also investigated. The experimental results confirmed the possibility to create nitrided layer with improved mechanical properties using nitriding and nitrocarburizing technologies on all three steel grades.
Từ khóa
Nitrocarburizing, plasma nitriding, C50, 30XH3A, 25X2H4BA, thấm cacbon-nitơ, thấm nitơ plasma
Chi tiết bài viết
Tài liệu tham khảo
2. Nguyễn Khắc Cường, Lê Trọng Hậu, Lý Quốc Cường, Một số kết quả nghiên cứu ban đầu về thấm C-N thể lỏng nhiệt độ thấp, Tạp chí Khoa học Công nghệ Kim loại, 2005, 3:21-24.
3. Pye D., Practical nitriding and ferritic nitrocarburizing, ASM International Materials Park, Ohio, USA 2003, 251 p.
4. Li Y. H., Luo D. F., Wu S. X., QPQ salt bath nitriding and corrosion resistance, Solid State Phenomena, 2006, 118:131-136.
5. Zhang L., Gao W., Microstructure and properties of 1Cr12Ni2WMoVNb (GX-8) steel bored barrels with and without QPQ treatment, Surface and Coatings Technology, 2017, 315:95-104.
6. Campagnolo A., Dabalà M. and Meneghetti G., Effect of salt bath nitrocarburizing and postoxidation on static and fatigue behaviours of a construction steel, Metals, 2019, 9(12):1-19.
7. Kusmic D., Hruby V., Corrosion resistance of plasma nitrided structural steels and modern methods of testing, Advances in Military Technology, 2008, 3(1):65-75.
8. Dobrocký D., Studený Z., Pokorný Z., Pospíchal M., Šmida O., Effect of plasma nitriding on the notch toughness of spring steel, METAL, 2016, p.1037-1044.
9. Basu A., Dutta Majumdar J. et al, Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding, Materials Letters, 2008, 62:3117-3120.
10. Holemar A., Hruby V., Iontová nitridace v praxi, SNTL, Praha 1989, 242 p.
11. Kusmic D., Van D. T., Hruby V., Corrosion and wear resistance of plasma nitrided and duplex treated 42CrMo4 steel, Manufacturing Technology, 2018, 18(2):259-265.
12. Lê Thị Chiều, Nguyễn Anh Sơn, Công nghệ thấm cacbon-nitơ sử dụng khí gas công nghiệp và xử lý nhiệt sau thấm cho thép 20CrMo và 18CrMnTi, Tạp chí Khoa học Công nghệ Kim loại, 2006, 8:32-36.
13. Nguyễn Văn Hiển, Lê Thị Chiều, Tạo lớp thấm cacbon-nitơ với pha thép hóa bền phân tán cho thép dụng cụ SKD61 và SKD11 trong môi trường lỏng ở nhiệt độ thấp, Tạp chí Khoa học Công nghệ Kim loại, 2007, 10:25-29.
14. ASTM E415-17, Standard test method for analysis of carbon and low-alloy steel by spark atomic emission spectrometry, ASTM International, West Conshohocken, PA, 2017.
15. ГОСТ 4543-2016, Металлопродукция из конструкционной легированной стали. Технические условия.
16. ISO 4287:1996, Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and parameters of surface texture.
17. DIN 50190-3, Härtetiefe wärmebehandelter Teile; Ermittlung der Nitrierhärtetiefe.
18. Doan T. V., Kusmič D., Pospíchal M., Dobrocký D., Improvement of wear resistance for C45 steel using plasma nitriding, nitrocarburizing and nitriding/manganese phosphating duplex treatment, In: IOP Conference Series: Materials Science and Engineering, 2017, 179(1):12017.
19. Kusmic D., Doan T. V., Tribological and corrosion properties of plasma nitrided and nitrocarburized 42CrMo4 steel, Materials Science and Engineering, 2017, 179(1):12046.
20. Li H. Y., Luo D. F., Yeung C. F. and Lau K. H., Microstructural studies of QPQ complex salt bath heat-treated steels, Journal of Materials Processing Technology, 1997, 69(1-3):45-49.